PIPE DIAMETER TAPE

Can't find a product? Call now! 888-756-4110

Can't find a product? Call now! 888-756-4110

Victaulic PT100A Steel Go/No-Go Pipe Diameter Tape For Use With 3/4 - 24 IN DN20 - DN600 Pipe

Go/No-Go pocket-sized steel tapes for taking circumferential measurements, marked in 1/100ths of an in increments
Go/No-Go side can be used to check cut or roll grooved pipe for conformance to Victaulic grooved pipe specifications
Tapes notched on the lead end to allow proper overlap within the groove for more accurate measurement
PT100A contains Go/No-Go markings for use with 3/4 - 24 IN, DN20 - DN600 pipe; tape marked with 0.01 IN, 0.25 MM increments on the opposite side
Go/no-go side of tapes may not be used to measure cast iron, ductile iron, or copper tube sizes

Brochure https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/VPT_Broc.pdf
Catalog https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_1000G107CE_Catalog.pdf
Specification Sheet https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_PFT510_Specification_Sheet.pdf
Instruction/Installation Manual https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_PT100A_Instruction_Installation_Manual.pdf