Double Acting Pneumatic Actuator, Series/Model: Series DAB, Air Port Size: 1/8 IN NPT, Pressure Rating: 140 PSIG, Spring Stroke: 1/4 IN Open/Close Stroke, Output Torque: 100 IN-LB At 80 PSI, Extruded Aluminum Alloy Body Material, Finish/Color: Anodized, Temperature Rating: -40 To 200 DEG F, Length: 6.1 IN, 2.78 IN Width, 3.88 IN Height, Additional Specifications: Actuator Volume: 5.7 CU-IN Counter Clockwise, 4.8 IN Clockwise, Double Acting Rotation: 90, 135, 180 DEG

• The automator series pneumatic actuators deliver high output torque in an efficient, space-saving housing
• With a low coefficient of friction, the automator series provides superior high-cycle, long lasting service
• The actuator shall be pneumatically operated and must travel a minimum of 90 DEG in each direction and must be able to over travel at 3% in each direction past 90 DEG
• Actuator shall be rack and pinion design, and the output torque shall be linear throughout travel
• Actuator must be supplied with two independent travel stop adjustment, the 0 and 90 DEG travel positions have travel adjustments of 5 to -5 DEG
• All pneumatic passage ways must be integral to the actuator housing so as to eliminate the need for external tubing
• Actuator shall be able to mount in any position without loss of performance
• The actuator shall be totally enclosed and contained in a single enclosure, with no external moving parts
• Die cast aluminum alloy with corrosion resistant polyester coating end cap
• Die cast aluminum alloy piston and carbon steel, zinc plated output shaft/pinion
• Alloy steel travel stop
• Acetal shaft bearings and piston guides
• Stainless steel fasteners and buna-N, o-ring seals
• Steel, protective coating spring

• Specification Sheet https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/DAB048_spec.pdf