MiniRester™ style Water Hammer Arrestor, Nominal Size: 1/2 IN, Connection Type: Straight Male Sweat, Temperature Rating: 250 DEG F, Pressure Rating: 350 PSI, Material: Type L Copper Tube, EPDM Ring, Length: 6-1/2 IN, Industry Standards: Certified By ASSE To The ANSI/ASSE 1010-2004 Standard, AA Size cUPC Listed To UPC And Canadian Codes And Standards, Other Physical Dimension: 7/8 IN Chamber Width, Additional Specifications: Burst Tested Pressure: 1500 PSI, Unit Size: AA, Fixture Unit: 1-4, Volume: 1.4 CU-IN

Sioux Chief 660 style series piston-type water hammer arresters shall be required in piping systems. Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system. Arresters shall be effective when installed at any angle. Arresters shall be approved for installation with no access panel required. Arresters shall be sized and placed per manufacturer¿s instructions.

• Bulk package
• Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system
• Arresters shall be effective when installed at any angle
• Arresters shall be approved for installation with no access panel required
• All miniresters are AA size
• No lead brass or copper fitting
• Poly piston with two EPDM o-rings
• Dow-Corning, 111 FDA approved silicone compound piston lubrication

Application: Compatible with press-fitting systems, such as Viega ProPress™ and all push-fitting systems

• Brochure/Catalog https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/652A_broc.pdf
• Specification https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/6602B_spec.pdf