Swing Check Valve, Series/Model: Model B-321, Nominal Size: 1 IN, Connection Type: FNPT, Pressure Rating: 300 PSI (CWP) Non-Shock, Class 150 Pressure Class, Bronze Body Material, Trim Material: Bronze Disc, Material Standard: Body And Disc: ASTM B61, Material Specification: Body And Disc: UNS C92200, Industry Standards: MSS-SP-80 Type 3 Compliant, 3.18 IN Width, Lead Free: No, Other Physical Dimension: 2.52 IN Inlet Center To Top Of Valve, Additional Specifications: Flow Co-Efficient (Cv): 30.68
Item Name
|
:
|
Swing Check Valve
|
Series/Model
|
:
|
Model B-321
|
Nominal Size
|
:
|
1 IN
|
Connection Type
|
:
|
FNPT
|
Pressure Rating
|
:
|
300 PSI (CWP) Non-Shock
|
Pressure Class
|
:
|
Class 150
|
Body Material
|
:
|
Bronze
|
Trim Material
|
:
|
Bronze Disc
|
Material Standard
|
:
|
Body And Disc: ASTM B61
|
Material Specification
|
:
|
Body And Disc: UNS C92200
|
Industry Standards
|
:
|
MSS-SP-80 Type 3 Compliant
|
Width
|
:
|
3.18 IN
|
Lead Free
|
:
|
No
|
Other Physical Dimension
|
:
|
2.52 IN Inlet Center To Top Of Valve
|
Additional Specifications
|
:
|
Flow Co-Efficient (Cv): 30.68
|
Weight
|
:
|
1.500 LB
|
Stockham® bronze valves have been specified, installed, and are proven performers in commercial and industrial facilities internationally.
- Threaded pipe ends conform to ASME B1.20.1. Most threaded end valves can be bored for silver brazed end connections. Solder ends comply with the ASME standard for solder joint fittings B16.18 and are suitable for use with Types K, L, and M copper tubing handling nonflammable materials
- End flanges of flanged valves are faced and drilled to meet ASME B16.24
- Caps on threaded end check valves have threaded or union body connections with sturdy wrench grips
- Discs may be nonmetallic (PTFE, viton® or buna-n) or metal (bronze). The available materials are noted on each valve page. Disc and disc holders are guided during travel by caps or bodies. The nonmetallic discs are securely fastened in disc holders and are easily replaced
- Hinge, hinge pin, side plug - Swing check hinges aremounted on type 304 hinge pins which are held in place by side plugs
- Marking - for identification, each globe and gate valve has a metal identification plate under the handwheel nut showing the Stockham figure number
- Testing - Before shipment, each and every valve is individually tested under pressure for soundness of body castings and tight closure
- Packaging - All valves are shipped in sturdy cardboard containers. This packaging protects the valves during shipment and facilitates storage
- Weights and dimensions - complete information on weights and dimensions is incorporated on the same pages with the valve listings. Weights and dimensions are furnished for estimating purposes only and are subject to change without notice except for basic dimensions established by accepted standards
Application: General Services Plumbing, Commercial Plumbing and HVAC, Industrial Plumbing and HVAC, Utility Applications
-
Brochure/Catalog
https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/050B309YCV_Broc.pdf
-
Specification Sheet
https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/100B321CV_Spec.pdf