90 DEG Elbow, Class 125 Pressure Class, Nominal Size: 1-1/4 IN, Connection Type: FNPT, STD Schedule, Material: Cast Iron, Material Standard: ASTM A126 Class A Minimum, Finish/Color: Black, Outside Diameter: 2.39 IN, Maximum Pressure: 175 PSI, Temperature Rating: -20 To 150 DEG F, Industry Standards: ANSI/ASME B16.4, ANSI/ASME B1.20.1, UL And ULC Listed, FM Approved, NSF 61 And NSF 61 Annex G, Other Physical Dimension: 1-3/4 IN Center To End, 0.67 IN Thread Length, 1.04 IN Take Out, Domestic/Import: Domestic

The iron from which Class 125 cast iron fittings are made is held to strict formula by careful chemical analysis and control. Tapping is done on the most modern machines. All tappings are to USA Standards for iron pipe threads. Straightness and correct depth of threads is assured through continuous capable inspection, by careful trained inspectors. Because of the close attention paid to formula control and the use of modern precision equipment we are able to produce castings of rugged strength and the ability to make a water tight seal.

• Every fitting is hand sorted and inspected to eliminate defective castings
• A chamfer is cut or cast in all openings, permitting easy entrance of pipe and preventing damage to the first thread in handling and threading

• Brochure/Catalog https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/12502515GTB_Broc.pdf
• MSDS https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/12502515GTB_MSDS.pdf