Dynabolt® Masonry Sleeve Anchor, 1/2 IN Diameter, Thread Size: 3/8-16, Thread Type: UNC, 3 IN Length, Material: Carbon Steel, Industry Standards: Tested To ASTM E488, Meets Or Exceeds U.S. Government G.S.A. Specification A-A-1922A (Formerly GSA: FF-S-325 Group II, Type 3, Class 3), FM, California State Fire Marshal Approved, Finish/Color: Zinc Plated, Hex Nut Head, Other Physical Dimension: 1-7/8 IN Minimum Embedment, 1-1/8 IN Maximum Thickness Of Material

• Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer
• Anchors are made of plated carbon steel, or type 18-8 stainless steel
• Anchors should be installed with carbide tipped hammer drill bits made IN accordance to ANSI B212.15-1994
• Anchors are tested to ASTM E488 criteria
• Anchor diameter equals hole diameter
• Heavy-loading capacity
• Preassembled for faster, easier installations
• Zinc-plated carbon steel and 304 stainless steel
• Provides full 360 DEG hole contact over large area and reduces concrete stress
• Sleeve design improves holding power
• No pre-spotting of holes necessary

• Catalog https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/RedHead_HN-1230_Catalog.pdf
• Instruction/Installation Manual https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/RedHead_HN-1230_Instruction_Installation_Manual.pdf
• Specification Sheet https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/RedHead_HN-1230_Specification_Sheet.pdf
• MSDS https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/ws-1226_msds.pdf