The TD42L and TD42H are maintainable thermodynamic steam traps the TD42L is specifically designed for relatively small condensate loads and therefore is ideal for mains drainage applications. TD42LA and TD42HA all external body surfaces have an electroless nickel preparation (ENP) which is both energy saving and oxidation resistant.

Thermodynamic steam traps combine reliability, simplicity and efficiency of operation. With just one moving part a hardened stainless steel disc, they give a blast discharge with clean, tight shut-off. Able to withstand superheat, water hammer, corrosive condensate, freezing and vibration. The TD trap is the first choice for removal of condensate from steam distribution systems.

• Positive condensate discharge with clean tight shut-off
• Discharges condensate at very close to steam temperature that ensures maximum plant efficiency
• Just one moving part, a disc, ensures reliable operation and minimal maintenance without having to remove from the line
• Compact and light weight, reducing installation costs
• Hardened disc and seat for long life
• One trap covers a wide range of operating pressures making selection and replacement simple
• Insulating cover for low ambient temperature or wet environments
• Thermodynamic traps can be used on high pressure and superheated steam and are not affected by water hammer or vibration
• AISI 416 Stainless steel cap assembly
• AISI 304 Stainless steel cap gasket/strainer

Applications: For steam main drainage, tracer lines, process equipment, outdoor installations subject to freezing

• Brochure/Catalog https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/S0683762_Broc.pdf
• Specification Sheet https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/SpiraxSarco_0680762_Specification_Sheet.pdf