CLAMP REPAIR 6 X 12-1/2 FOR STEEL PIPE

The Dresser Style 360 repair clamp offers simplicity and ease of installation. Just wrap the clamp around the pipe, drop the bolts in place and tighten. It's that simple. Moreover, special 1 IN long nuts allow the use of a standard deep socket wrench for complete tightening. In the smaller 7-1/2 IN band width, a third bolt is included so the middle bolt and nut can be used to pre-tighten the clamp. Additionally, the smaller sized clamps feature a flexible band which means less holding force is required while tightening. With the "360" clamp you can repair holes, breaks and splits in a variety of water pipelines. You can use it where pipe ends are separated or where ends are deflected up to 4 DEG or 1/8 IN or you can join two pipes with a variation of 1/4 IN outside diameter. Clamp features include a tapered gasket with a gridded design and the spanner is molded flush with the gasket to prevent "hang up". The "360" has a stainless band, lugs of rugged ductile iron and bolts of corrosion-resistant Dresserloy.

Dresser Pipe Repair Clamp, Type: Style 360, Item Name: Pipe Repair Clamp, 6 IN Nominal, 304 Stainless Steel, 6.56 - 6.96 IN Outside Diameter, 12-1/2 IN Length, 200 PSI Maximum Pressure, Additional Specifications: For Steel Pipe

• 1 IN long nuts allow tightening with standard deep socket wrench
• Drop-in bolts - no need to remove bolts in the ditch, no loose parts to lose or misplace
• Multi-band clamp - features a multi-band design in the 14 IN through 30 IN sizes, clamp is packaged and shipped "in the flat" meaning the bands are not formed to the radius of the pipe, reduces storage space and installation time and has twice the adjustment range of the single-band clamp

• Specification Name https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/DRESSER03600235030_Spec.pdf