The S2 separator is a cast iron baffle type separator used for the removal of entrained liquids in steam, compressed air or gas systems the fitting of insulation jackets will increase the performance of the separator.

Separator, Series/Model: Model S2, Nominal Size: 1-1/2 IN, Capacity: 570 SCFM, 1792 LB/HR, Connection Type: NPT, Pressure Rating: 145 PSIG, Temperature Rating: 184 DEG C, Cast Iron Body Material, Material Standard: ASTM A126 Grade B, Length: 12 IN, 3-1/2 IN Width

• Moisture Separators are used to improve the quality of steam or compressed air either within the distribution system or on the supply inlet to equipment
• Removal of moisture is by a series of baffles on which the suspended water droplets impinge and fall out by gravity to the drain, which must be piped to a trap
• Semi rigid graphite laminate gasket
• BS 1768 grade 5 steel UNF bolts
• Malleable iron bushing and plug
• Reinforced exfoliated graphite gasket

Application: Used in on steam mains, as a drip station ahead of steam pressure reducing or temperature control valves, on the steam inlet to laundry presses and other process equipment

• Instruction/Installation Manual https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/SpiraxSarco_0230391_Instruction_Installation_Manual.pdf
• Specification Sheet https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/SpiraxSarco_0232691_Specification_Sheet.pdf