Can't find a product? Call now! 888-756-4110

Need something special? We can help! Call 888-756-4110

Call us

Email Us

Supplying Quality Pipe, Valves and Fittings with Services Built for Contractors and Industries

PIPE DIAMETER TAPE

Victaulic PT100A Steel Go/No-Go Pipe Diameter Tape For Use With 3/4 - 24 IN DN20 - DN600 Pipe

Go/No-Go pocket-sized steel tapes for taking circumferential measurements, marked in 1/100ths of an in increments
Go/No-Go side can be used to check cut or roll grooved pipe for conformance to Victaulic grooved pipe specifications
Tapes notched on the lead end to allow proper overlap within the groove for more accurate measurement
PT100A contains Go/No-Go markings for use with 3/4 - 24 IN, DN20 - DN600 pipe; tape marked with 0.01 IN, 0.25 MM increments on the opposite side
Go/no-go side of tapes may not be used to measure cast iron, ductile iron, or copper tube sizes

Brochure https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_PT100A_Brochure.pdf
Catalog https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_A040010PHL_Catalog.pdf
Instruction/Installation Manual https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_PT100A_Instruction_Installation_Manual.pdf
Specification Sheet https://macombstage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_PT100A_Specification_Sheet.pdf